Digital Voltage Tester

calcActive())">
Description
The Digital Voltage Tester is used to check that the track is powered.
· The tester reads in 100 volt increments up to 10,000V.
· Put one probe to one track braid and the other to the second track braid.
· The reading should be between 5,000V and 9,000V (5.0 - 9.0KV).
· The tester reads in 100 volt increments up to 10,000V.
· Put one probe to one track braid and the other to the second track braid.
· The reading should be between 5,000V and 9,000V (5.0 - 9.0KV).