Roof Mount 1m Upright

Increasingly, large roofs are being proofed to protect against pigeons and gulls. In most circumstances it is not feasible to drill into the roof itself, so net supports that can be weighted down are required. As no two roofs are the same, the supports need to be adaptable to fit different roof shapes, angles and obstacles. <BR><br>Network's patented Roof Mount far exceeds these criteria. It is light-weight, very easy to handle, extremely versatile and allows fast installation. <br>· The upright (0.85m long and 0.4kg) and legs (each 0.55m long and 0.3kg) are made from fibreglass.<br>· The metal sleeve is 0.2m long and slots over the pole to make the overall height 1m<br>· The metal base unit and feet weigh 3.1kg<BR><BR>The components can be assembled in an almost infinite number of positions, making the mount suitable for almost any roof configuration including flat roofs, sloped roofs, triangular roof ridges, round ridges and roof gullies. See diagrams for examples. The metal components are manufactured from mild steel that is spin galvanised to give excellent corrosion resistance. The fibreglass legs and upright have a surface veil for weather protection. <BR><BR><B>Quick to install</b><BR>Use self drill screws (provided in the kit) and Avifix to secure and seal the tubes in place. Allow 1 tube of Avifix per 4 mounts. The bases and feet are designed to support the corners of 2 paving slabs (one each side of the base). Either 450mm or 600mm paving slabs can be used. The sleeve allows for a further upright to be added to make the pole higher. The adjustable base is locked in position using 10mm spanners to tighten the clamping rod, and self drill screws. <BR><BR><B>Tools required</b><br>· 10mm spanners for clamping rod nuts<br>· 8mm Hex Drive Socket (NET134) for self drill screws<br>· Caulking gun for Avifix to seal the tubes in place •Consists of 1 x 1m Fibreglass Pole and 1 Sleeve which attach to the Roof Mount Base (NET950). •Use Avifix (ADH006) and self drill screws (supplied with NET950) to secure the tubes in place •When fitted into the base they support the wire rope and netting used to proof the roof. •The pole is 0.85m in length and weighs 0.3kg. •The sleeve is 0.2m long and slots over the pole to make the overall height 1m. •Very easy to assemble, cutting down on the installation time. •The grey colour of the tubes blends well with the sky and grey roofs, which are the usual backdrops. •Fibreglass