Pro Cladding Bolt, Small x 10

The Nylon Cladding Bolts form a secure fastening into thin metal or plastic sheeting. Simply drill a 13mm hole, push the nylon 'nut' up to its collar into the cladding, then clamp it in place by screwing in the eyebolt - all done from the outside. Cladding Bolts have shields made from flexible EPDE, which will expand tightly into the shape of the hole even if irregular. They can be used in brittle substrates and cladding. •Supplied in packs of 10. •For use on cladding. •Each cladding bolt contains an eyebolt, rubber expansion shield, nut and washer. •Suitable when the substrate is 0.4mm to 3.5mm thick. •Stainless Steel • •To install: - drill a 13mm diameter by 40mm deep hole - insert the cladding bolt and rotate the eye, this causes the rubber shield to expand and clamp behind the substrate. - position the cladding bolt at 10m intervals or where the nets turns a corner. - Attach the wire rope to the cladding bolt.