Roof Spike - 520mm
These Brackets hold the straining wire above a roof ridge. Half-Round Ridge Brackets and Triangular Brackets. The rods on both brackets are 450mm in height. Triangular Brackets are installed by gluing the bracket with Avifix and hammering Blind Anchor Rivets into a drilled hole. This technique can also be used for the Half-Round Ridge Net Bracket or alternatively these can be clamped under the edge of the ridge tile. Stainless steel Roof Spikes are designed to hold the wire rope above roof ridges. These spikes are hammered through the mortar between the ridge tiles into the wooden joist below. The rod is 520mm in length, 10mm in diameter with a 3mm hole in the top for the straining wire. The holes can be weather proofed with a Roof Spike Seal that is glued in place with Avifix.
- SKU
- NET190
Description
These Brackets hold the straining wire above a roof ridge. Half-Round Ridge Brackets and Triangular Brackets. The rods on both brackets are 450mm in height. Triangular Brackets are installed by gluing the bracket with Avifix and hammering Blind Anchor Rivets into a drilled hole. This technique can also be used for the Half-Round Ridge Net Bracket or alternatively these can be clamped under the edge of the ridge tile. Stainless steel Roof Spikes are designed to hold the wire rope above roof ridges. These spikes are hammered through the mortar between the ridge tiles into the wooden joist below. The rod is 520mm in length, 10mm in diameter with a 3mm hole in the top for the straining wire. The holes can be weather proofed with a Roof Spike Seal that is glued in place with Avifix.